Search results

The purpose of this paper is to investigate the tribological properties of liquid paraffin with SiO₂ nanoparticles additive made by a sol‐gel method.

The tribological properties of the SiO₂ nanoparticles as an additive in liquid paraffin are measured using a ball‐on‐ring wear tester to determine the optimal additive concentration. The mechanism that wear and friction are reduced is studied using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and atomic force microscope (AFM).

Experimental results indicate that the sizes of the synthesized SiO₂ nanoparticles are distributed uniformly and that the optimal concentrations of SiO₂ nanoparticles in liquid paraffin is associated with better tribological properties than pure paraffin oil, and an anti‐wear (AW) ability that depends on the particle size.

It is shown in the paper that by reducing friction and AW, the lubricant prepared by the methods described can prolong operating hours of machinery.

This paper seeks to modify the determinations of flow rate and fluid resistance, which can be realized and confident from the measurements of flow rates in experiments.

According to coupled physics of solid membrane and lubrication fluid, finite element method is used simultaneously to determine membrane deflection and film thickness. Several cases are simulated by traditional method, finite element method and compared with experimental method for the flow rates and fluid resistances to present the modification of determination results.

The FEM results for the fixed eight‐section are approximated to actual flow rate and are consistent with the modified determination of the flow rates, and so the modified determinations of the flow rates are verified. When a computer of P4 with 1.8 GHz CPU and 512 MB RAM is utilized, time needed for traditional method or modified formula is fewer than one second. However, more than 4 h is required for FEM by using the same computer.

This study provides the modified method for the determinations of flow rate and fluid resistance in membrane‐type restrictors by using FEM. The FEM results can increase the determination accuracy of the flow rate and restriction coefficient in the design of membrane‐type restrictors.

The present paper proposes a theoretical analysis of the stability characteristics of a rigid rotor‐hybrid bearing system. It is intended that on the basis of the numerical results drawn from this study, the optimal restriction parameter for stable operation can be determined for use in the bearing design process.

A rigid rotor supported by hybrid oil film bearings with six recesses and capillary‐compensated restrictors is studied. In order to facilitate the calculation of film dynamics, using the perturbation method, the Reynolds equation was linearized and subsequently solved using finite difference techniques, whilst the stability maps were determined by the Routh‐Hurwitz method.

The data reported here suggest that the stability characteristics of the rigid rotor‐bearing system could be improved by the use of shallow, dual‐recessed hybrid bearings with capillary compensation. For the same restriction parameter and the same land‐width ratio used in large eccentricity case the stability characteristics of a shallow‐recessed bearing is superior to that of a deep‐recessed bearing, however, a deep‐recessed bearing with a small land‐width ratio and a small restriction parameter can provide better stability than a shallow‐recessed bearing with a large land‐width ratio or with a large restriction parameter.

This study proposes an extensive database as a critical requirement in the design of hybrid bearings, in order to ensure that a rotor bearing system is operating stably.

The purpose of this paper is to study the dispersion and tribological properties of liquid paraffin with aluminum nanoparticles as additive, which are prepared by the surface‐modification method using oleic acid (OA).

The dispersion stability of aluminum nanoparticles in liquid paraffin is measured by spectrophotometry, which can be optimization by Taguchi method. The tribological properties are evaluated by using a ball‐on‐ring wear tester.

The results show that few concentrations of aluminum nanoparticles as additives in liquid paraffin have better antiwear and antifriction properties than the pure paraffin oil. Scanning electron microscopy and energy dispersive spectrometer analyses can show that the thin films on the rubbing surfaces can be formed by these aluminum nanoparticles, which not only bear the load but also separate the both interfaces, thus the wear and friction can be reduced.

Machine components and mechanism pairs rely on high‐quality lubricants to withstand high temperature and extreme pressure. Extreme pressure and antiwear additives are typically adopted to improve the tribological performance of a fluid lubricant in reducing friction and surface damage under severe conditions.

The present paper proposes a theoretical analysis of the stability characteristics of a Jeffcott rotor‐hybrid bearing system. It is intended that on the basis of the numerical results drawn from this study, appropriate recess depth, land size, orifice location and speed parameter for stable operation can be determined for use in the bearing design process.

A Jeffcott rotor supported by hybrid oil film bearings with dual‐row recesses and orifice‐ compensated restrictors is studied. In order to facilitate the calculation of film dynamics, using the perturbation method, the Reynolds equation was linearized and subsequently solved using finite difference techniques, whilst the stability maps were determined by the Routh‐Hurwitz method.

The data reported here suggest that the stability characteristics of the Jeffcott rotor‐bearing system could be improved by the use of shallow, dual‐recessed hybrid bearings with orifice compensation. In addition to greater eccentricity ratios, smaller land‐width ratios and greater shaft stiffness may also provide shallow‐recessed bearings with better stability. In all cases, the stability provided by upstream orifice‐sited bearings is better than that provided by center orifice‐sited bearings, whilst high‐speed parameters may also provide a greater stability threshold.

This study proposes an extensive database as a critical requirement in the design of hybrid bearings, in order to ensure that a rotor bearing system is operating stably.

The purpose of this paper is to study the influences of both the number and locations of entry holes on the static and dynamic characteristics of a rigid rotor supported by two double‐rows, inherently compensated aerostatic bearings.

The air is assumed to be perfect gas undergoing the adiabatic process and passing through entry holes into the bearing clearance. Air film in the clearance is governed by Reynolds equation including the coupled effects of wedge due to rotor rotation and squeezed film due to rotor oscillation.

The method is used to analyze Reynolds equation, which is then solved by the finite difference method and numerical integration to yield static and dynamic characteristics of air film. The equation of motion of the rotor‐bearing system is obtained by using the perturbation method and the eigensolution method is used to determine the stability threshold and critical whirl ratio.

The paper considers the eccentricity, rotor speed, and restriction parameter in the analysis of the whirl instability of the rotor‐aerostatic bearing system for the comparisons between various designs in the number and locations of entry holes of aerostatic bearings.

This paper aims to study the static characteristics of the hydrostatic conical journal bearings by utilizing single-action membrane restrictors to compensate the working pressures of recesses.

The flow resistance network method is used to analyze the influences of load capacity and static stiffness of bearing with the design parameters, including the number of recesses, radial eccentricity ratio, axial displacement ratio, restriction constant, membrane compliance, length-diameter ratio, circumferential land width ratio, axial land width ratio and half of cone angle.

This study shows the infinite stiffness of the oil produced in the first and second recesses while single-action membrane restriction constant of 2 and 3, respectively, as well as in the fourth recess while single-action membrane restriction constant of 0.01 and 0.1, respectively.

This article provides the hydrostatic conical bearings in static and unbiased states for analyses of design parameters. The analyses ignore dynamic pressure effect and do not use the Reynolds equation, and assuming that each oil recesses pressure is constant.

The influences of the design parameters including the number of recesses, membrane restriction, membrane compliance, length-diameter ratio, half of con-angle, circumferential land width ratio, and axial land width ratio are discussed to the load capacity and static stiffness of conical bearing.

Based on the characteristics of the conical bearing through analysis, this article suggests the front bearing with hard membrane restrictor (capillary) and the back bearing with soft membrane restrictor are the most appropriate for axial stiffness.

The purpose of this paper is to investigate the static stiffness of hydrostatic bearings with three constant compensations in types of constant‐flow pump, capillary and orifice, and both single‐action and double‐action variable restrictors with cylindrical‐spool, tapered‐spool, and membrane types by film gradient and recess pressure.

This paper utilizes the equations of flow equilibrium to determine the variations of film thickness or displacement of loading table with respect to the varying of recess pressure. For a hydrostatic bearing whose recess pressures are controlled by compensations, the stiffness characteristics can be presented directly by these variations.

The usage range of recess pressure and compensation parameters should be selected to correspond to a variation with smallest gradient.

This paper proposes an extensive database as a critical requirement for the selection of types and parameters of the compensation as to yield the acceptable or optimized characteristics in design of hydrostatic bearings.

Constant flow valves have been presented in industrial applications or academic studies, which compensate pressures of bearing recesses as load fluctuates. The flow rate of constant-flow valves (CFVs) can be constant in spite of the pressure changes in recesses. However, specific condition of design parameters must be satisfied. The paper aims to discuss these issues.

This paper utilizes analytical method to study the static characteristics of CFVs, three types belong to traditional design of CFV are reviewed afresh. Moreover, an innovative design for constant flow is presented and studied.

The review and study results reveal that appropriate relationships among design parameters for these types of CFVs.

The numerical simulation is used to investigate the influence of design parameters on the change of flow rate when pressure ratio of recess is changed.